| D Class T Type
According to NF EN 1065 | | | - A permanent safety device between main and sliding tube
- A stop adjusting nut system
- A 100 mm clearance for hand safety
- A hot deep galvanisation protection
- A safety device avoiding fingers pinching
- A reinforced base
- A captivated retaining pin
| | | | daN Working Load
Security coef: 1,65 according to Eurocode 3 | | | Extension (m) | class | | D25T | D30T | D35T | D40T | | from 1.6 to 2.5 | from 1.8 to 3.0 | from 2.1 to 3.5 | from 2.3 to 4.0 | | | | | | | 1.6 et 1.7 | 2060 | | | | | 1,8 | 2060 | | | | 1,9 | | | | 2 | | | | 2,1 | 2060 | | | 2,2 | | | 2,3 | 2060 | | 2,4 | | 2,5 | | 2,6 | | | 2,7 | | | 2,8 | | | 2,9 | | | 3 | | | 3,1 | | | | 3,2 | | | | 3,3 | | | | 3,4 | | | | 3,5 | | | | 3,6 | | | | | 3,7 | | | | | 3,8 | | | | | 3,9 | | | | | 4 | | | | | Reference | END250T | END300T | END350T | END400T | | | | Components (mm) | | Classe | Weight (Kg) | Ø outer tube | Ø inner tube | Ø pin | base | | D 25 T | 15 | Ø 57 | Ø 48,3 | Ø 13 | 120 x 120
x 6 | | D 30 T | 16,8 | | D 35 T | 18,7 | | D 40 T | 21,7 | | | | |
