| Clase B Tipo T
Según norma NF EN 1065 | | | - A permanent safety device between main and sliding tube
- A stop adjusting nut system
- A 100 mm clearance for hand safety
- A hot deep galvanisation protection
- A safety device avoiding fingers pinching
- A reinforced Platina
- A captivated retaining cerrojo
| | | | Carga de utilización en daN
Coeficiente de seguridad: 1.65 según Eurocódigo 3 |  | | Extensión (m) | classe | | B25T | B30T | B35T | B40T | B45T | B50T | B55T | | from 1.6 to 2.5 | from 1.8 to 3.0 | from 2.1 to 3.5 | from 2.3 to 4.0 | from 2.6 to 4.5 | from 2.8 to 5.0 | from 3.1 to 5.5 | | | 1.6 et 1.7 | 3090 | | | | | | | | 1,8 | 3090 | 3090 | | | | | | | 1,9 | 2854 | 3090 | | | | | | | 2 | 2576 | 3090 | | | | | | | 2,1 | 2336 | 2804 | 3090 | | | | | | 2,2 | 2129 | 2554 | 2980 | | | | | | 2,3 | 1948 | 2337 | 2727 | 3090 | | | | | 2,4 | 1789 | 2146 | 2504 | 2862 | | | | | 2,5 | 1648 | 1978 | 2308 | 2638 | | | | | 2,6 | | 1829 | 2134 | 2439 | 2743 | | | | 2,7 | | 1696 | 1979 | 2261 | 2544 | | | | 2,8 | | 1577 | 1840 | 2103 | 2365 | 2628 | | | 2,9 | | 1470 | 1715 | 1960 | 2205 | 2450 | | | 3 | | 1374 | 1603 | 1832 | 2061 | 2290 | | | 3,1 | | | 1501 | 1715 | 1930 | 2144 | 2359 | | 3,2 | | | 1409 | 1610 | 1811 | 2012 | 2214 | | 3,3 | | | 1325 | 1514 | 1703 | 1892 | 2081 | | 3,4 | | | 1248 | 1426 | 1604 | 1783 | 1961 | | 3,5 | | | 1177 | 1346 | 1514 | 1682 | 1850 | | 3,6 | | | | 1272 | 1431 | 1590 | 1749 | | 3,7 | | | | 1204 | 1355 | 1505 | 1656 | | 3,8 | | | | 1142 | 1284 | 1427 | 1570 | | 3,9 | | | | 1084 | 1219 | 1355 | 1490 | | 4 | | | | 1030 | 1159 | 1288 | 1417 | | 4,1 | | | | | 1103 | 1226 | 1348 | | 4,2 | | | | | 1051 | 1168 | 1285 | | 4,3 | | | | | 1003 | 1114 | 1226 | | 4,4 | | | | | 957 | 1064 | 1171 | | 4,5 | | | | | 915 | 1018 | 1119 | | 4,6 | | | | | | 973 | 1071 | | 4,7 | | | | | | 932 | 1026 | | 4,8 | | | | | | 894 | 983 | | 4,9 | | | | | | 858 | 944 | | 5 | | | | | | 824 | 906 | | 5,1 | | | | | | | 871 | | 5,2 | | | | | | | 838 | | 5,3 | | | | | | | 806 | | 5,4 | | | | | | | 777 | | 5,5 | | | | | | | 749 | | Referencia | ENB250T | ENB300T | ENB350T | ENB400T | ENB450T | ENB500T | ENB550T | | | | Componentes (mm) | | clase | peso (Kg) | Ø embone | Ø corredera | Ø cerrojo | Platina | | B 25 T | 13,7 | Ø 57 | Ø 48,3 | Ø 13 | 120 x 120
x 6 | | B 30 T | 15,4 | | B 35 T | 17 | | B 40 T | 18,7 | | B 45 T | 20,3 | | B 50 T | 22 | | B 55 T | 23,6 | | | | |
